Hits
Magnetic loop with capacitive load for 30-10m
Suspended between two 3m Wires 20m Band about 1.8m above Ground.The ends of the suspension wires have to be folded back and twisted or shortened for 15, 12 and 10m
post 05 Dec 2024
Antenna Loop Links →
Magnetic Loop Experiments
A 145MHz 2m loop. Using the software at the bottom of this page, I worked out that a 36cm length of wire, will need a capacitance of around 3.6pf, and around a 50% efficiency
Magnetic loop for 160M
Tuning capacitor and section of 160m-loop 7/8" Cellflex-Cable, 2.8m diameter
Magnetic loop with capacitive load for 30-10M
Equilateral Triangle Loop, Aluminium Profile 8 x 1mm, 1m side length
Portable Magnet Antenne von
An old radio-controlled rotary capacitor approx. 2x350 pF, a rotary capacitor approx. 50 pF for the 10-15 meter band, voltage-resistant ceramic capacitors 500pF to 3500pF
150
A 145MHz 2m loop. Using the software at the bottom of this page, I worked out that a 36cm length of wire, will need a capacitance of around 3.6pf, and around a 50% efficiency
Tuning capacitor and section of 160m-loop 7/8" Cellflex-Cable, 2.8m diameter
Equilateral Triangle Loop, Aluminium Profile 8 x 1mm, 1m side length
An old radio-controlled rotary capacitor approx. 2x350 pF, a rotary capacitor approx. 50 pF for the 10-15 meter band, voltage-resistant ceramic capacitors 500pF to 3500pF
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62
Radioassistance Radioassistance E Kenwood Dealer, vendita ricetrasmittenti, antenne, parti di ricambio, elettronica
Conrad Electronic Electronic components online shop in German and Italian