Hits
Dipolo accorciato per 40 80m
La sintonizzazione dovrebbe iniziare sulla sezione 40m con una distanza di 10,5 m
post 28 May 2024
Antenna Multibands Links →
Building short trap dipole
a QST article for a short 40, 80 and 160 meter trap dipole, I decided to pursue construction of this antenna, and bend the 160 meter end wire, if necessary to fit into the yard
Antena para 40 e 80 metros tipo W3DZZ
This antenna is equivalent to a simple dipole in 40 meters, since the traps are equivalent to an insulator
Three Double-Extended Zepps
The antenna can also be powered with a 300 ohm TV two-wire line, but it is preferable that the power supply is via a stub
Windom
Adattare l'impedenza della discesa a 50 ohm con il valore tipico di questa antenna, che sia aggira intorno ai 300 ohm
Dual band Antenna 80/40 loaded coil inverted V
Antenna 40-80m, inverter "V" SWR results are quite good at 3.799
156
a QST article for a short 40, 80 and 160 meter trap dipole, I decided to pursue construction of this antenna, and bend the 160 meter end wire, if necessary to fit into the yard
This antenna is equivalent to a simple dipole in 40 meters, since the traps are equivalent to an insulator
The antenna can also be powered with a 300 ohm TV two-wire line, but it is preferable that the power supply is via a stub
Adattare l'impedenza della discesa a 50 ohm con il valore tipico di questa antenna, che sia aggira intorno ai 300 ohm
Antenna 40-80m, inverter "V" SWR results are quite good at 3.799
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free