Hits
Antenna Rombica
The name rhombic antenna comes from the fact that it is made up of four conductors, in the form of wires
post 14 Feb 2024
Antenna Multibands Links →
Building short trap dipole
a QST article for a short 40, 80 and 160 meter trap dipole, I decided to pursue construction of this antenna, and bend the 160 meter end wire, if necessary to fit into the yard
Antena para 40 e 80 metros tipo W3DZZ
This antenna is equivalent to a simple dipole in 40 meters, since the traps are equivalent to an insulator
Three Double-Extended Zepps
The antenna can also be powered with a 300 ohm TV two-wire line, but it is preferable that the power supply is via a stub
Windom
Adattare l'impedenza della discesa a 50 ohm con il valore tipico di questa antenna, che sia aggira intorno ai 300 ohm
Dual band Antenna 80/40 loaded coil inverted V
Antenna 40-80m, inverter "V" SWR results are quite good at 3.799
156
a QST article for a short 40, 80 and 160 meter trap dipole, I decided to pursue construction of this antenna, and bend the 160 meter end wire, if necessary to fit into the yard
This antenna is equivalent to a simple dipole in 40 meters, since the traps are equivalent to an insulator
The antenna can also be powered with a 300 ohm TV two-wire line, but it is preferable that the power supply is via a stub
Adattare l'impedenza della discesa a 50 ohm con il valore tipico di questa antenna, che sia aggira intorno ai 300 ohm
Antenna 40-80m, inverter "V" SWR results are quite good at 3.799
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free