Hits
Balun HF antenna morgain 1.5KW
Si tratta di un dispositivo per adattare carichi sbilanciati come i cavi coassiali, a carichi bilanciati quali sono le antenne filari
post 08 Feb 2024
Toroid & balun Links →
Balun and Transformer Core Selection
I mainly use 73 material for receiving applications in low power applications between .1 and 30 MHz
Putting a Balun and a Tuner Together
Use a balun to connect from the twinlead to an unbalanced tuner
RF Baluns
This method will increase the antenna feed impedance by four so with a 50 ohm feeder it is suitable for driving 200 ohm impedance antennas, such as folded dipoles
Programs for balun
Baluns are very complicated with poor designs giving very poor results. If you have some knowledge, this program will assist you in designing rf transformers and antenna baluns and unun
202
I mainly use 73 material for receiving applications in low power applications between .1 and 30 MHz
Use a balun to connect from the twinlead to an unbalanced tuner
This method will increase the antenna feed impedance by four so with a 50 ohm feeder it is suitable for driving 200 ohm impedance antennas, such as folded dipoles
Baluns are very complicated with poor designs giving very poor results. If you have some knowledge, this program will assist you in designing rf transformers and antenna baluns and unun
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free