Hits
Putting a Balun and a Tuner Together
A simple way to include the capability to handle balanced loads is to include a balun somewhere in the circuit
post 23 Dec 2024
Toroid & balun Links →
4:1 Current Balun using Ferrite rods
Guanella 4:1 Current Balun using Ferrite rods most articles on building the Guanella 4:1 Current balun use one or two toroids. For the range 1.8 MHz to 28 MHz
Zip Cord Transmission Lines and Baluns
A commercially available 4:1 voltage balun, was originally used for the transition between the 50 ohm coaxial cable and the balanced speaker wire transmission line
Calculating a choke balun
When the decision is made to put a balun type filter shoke choke balun, there is more to decide which coaxial cable to use; which diameter to give to the winding, and how many turns to put there
A Cost Effective Current-Mode 1:4 Balun
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods
200
Guanella 4:1 Current Balun using Ferrite rods most articles on building the Guanella 4:1 Current balun use one or two toroids. For the range 1.8 MHz to 28 MHz
A commercially available 4:1 voltage balun, was originally used for the transition between the 50 ohm coaxial cable and the balanced speaker wire transmission line
When the decision is made to put a balun type filter shoke choke balun, there is more to decide which coaxial cable to use; which diameter to give to the winding, and how many turns to put there
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62
Radioassistance Radioassistance E Kenwood Dealer, vendita ricetrasmittenti, antenne, parti di ricambio, elettronica
Conrad Electronic Electronic components online shop in German and Italian