Hits
Balun and Transformer Core Selection
Occasionally errors are made regarding core selection. This especially includes baluns
post 03 Oct 2024
Toroid & balun Links →
4:1 Current Balun using Ferrite rods
Guanella 4:1 Current Balun using Ferrite rods most articles on building the Guanella 4:1 Current balun use one or two toroids. For the range 1.8 MHz to 28 MHz
Zip Cord Transmission Lines and Baluns
A commercially available 4:1 voltage balun, was originally used for the transition between the 50 ohm coaxial cable and the balanced speaker wire transmission line
Calculating a choke balun
When the decision is made to put a balun type filter shoke choke balun, there is more to decide which coaxial cable to use; which diameter to give to the winding, and how many turns to put there
A Cost Effective Current-Mode 1:4 Balun
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods
202
Guanella 4:1 Current Balun using Ferrite rods most articles on building the Guanella 4:1 Current balun use one or two toroids. For the range 1.8 MHz to 28 MHz
A commercially available 4:1 voltage balun, was originally used for the transition between the 50 ohm coaxial cable and the balanced speaker wire transmission line
When the decision is made to put a balun type filter shoke choke balun, there is more to decide which coaxial cable to use; which diameter to give to the winding, and how many turns to put there
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free