Hits
Z-Match Portable Antenna Tuner
I built the Z-Match in about 3-4 days using available parts. decided I wanted to use my Z-Match for 7-21 Mhz operation so I adjusted the coil L1 to give me that range
post 05 Dec 2024
Antenna Transmatch tuner Links →
Tuner in LC circuit
The tuner is connected to the transceiver via a coaxial cable and a SWR meter. Antenna and earth are connected directly to the tuner
Transmach 1,8 a 30 MHz eñado para las bandas de radio-aficionados
The transmach, is designed for radio-amateur bands, it is recommended, although it does not appear in the circuit, to place a 2.5 mH radio frequency shock at the output
Tuner 1,8-50
Variable capacitors and switch from R-104 BSN block. In the absence of these capacitors, it is possible to use 2 sections, from the transmission radios
186
The tuner is connected to the transceiver via a coaxial cable and a SWR meter. Antenna and earth are connected directly to the tuner
The transmach, is designed for radio-amateur bands, it is recommended, although it does not appear in the circuit, to place a 2.5 mH radio frequency shock at the output
Variable capacitors and switch from R-104 BSN block. In the absence of these capacitors, it is possible to use 2 sections, from the transmission radios
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62