Hits 

I built a ZM-2 QRP Antenna


I built a ZM-2 QRP Antenna

The Emtech ZM-2 Antenna Tuner is a nifty little portable transmatch for QRP

post 05 Dec 2024


Antenna Transmatch tuner Links

186



Transmatch automat
Working: 3.0 to 30 MHz. Input power: Over 2500 W PEP

Transmatchs varios acopladores de antenas
As a reference for these projects, variable capacitors of around 410pf, common in valve receivers, are in most cases perfectly usable for low or medium powers

Tuner W1FB scheme Compiled
Variable capacitors have a capacity of 200 pF, for a power of 2 kW at the peak, the gap between the plates should be about 2 mm. L1 - coil with slider, maximum inductance 25 mH. L2 - 3 turns of 3.3 mm bare wire on a 25mm mandrel

Tuners antenne 7 MHz with only one CV
A 1: 1 ratio balancer made with a T200 toroid makes it possible to connect the transceiver with a coaxial cable to the symmetrical circuit formed by the chokes and the CV. As the isolation of the CV is weak

Tuner for HF


PIC-Keyer

PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62

RF Inductance Calculator

RF Inductance Calculator Mean diameter of the air core coil, measured from conductor centre to conductor centre include the wire insulation thickness, if any

Voice Recorder

Voice Recorder Gestito dall'integrato in questione ed offre la possibilità di registrare più messaggi per una durata massima di un minuto con buona fedeltà di riproduzione