Hits
Homebrew SGC SG-237 Control Box
It with a 65 foot long inverted-L antenna and I can operate all bands from 160m to 6m with 100 W power levels and this coupler has no problem
post 14 Oct 2024
Antenna Transmatch tuner Links →
Transmatch automat
Working: 3.0 to 30 MHz. Input power: Over 2500 W PEP
Transmatchs varios acopladores de antenas
As a reference for these projects, variable capacitors of around 410pf, common in valve receivers, are in most cases perfectly usable for low or medium powers
Tuner W1FB scheme Compiled
Variable capacitors have a capacity of 200 pF, for a power of 2 kW at the peak, the gap between the plates should be about 2 mm. L1 - coil with slider, maximum inductance 25 mH. L2 - 3 turns of 3.3 mm bare wire on a 25mm mandrel
Tuners antenne 7 MHz with only one CV
A 1: 1 ratio balancer made with a T200 toroid makes it possible to connect the transceiver with a coaxial cable to the symmetrical circuit formed by the chokes and the CV. As the isolation of the CV is weak
Tuner for HF
193
Working: 3.0 to 30 MHz. Input power: Over 2500 W PEP
As a reference for these projects, variable capacitors of around 410pf, common in valve receivers, are in most cases perfectly usable for low or medium powers
Variable capacitors have a capacity of 200 pF, for a power of 2 kW at the peak, the gap between the plates should be about 2 mm. L1 - coil with slider, maximum inductance 25 mH. L2 - 3 turns of 3.3 mm bare wire on a 25mm mandrel
A 1: 1 ratio balancer made with a T200 toroid makes it possible to connect the transceiver with a coaxial cable to the symmetrical circuit formed by the chokes and the CV. As the isolation of the CV is weak
Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal