Hits
Accordatore HF 1.8 50 MHZ 100 watt
Per il contenitore ho usato una scatola per montaggi elettrici in pvc tipo gewiss di dimensioni 30x20x6 cm schermandola poi internamente con della comune stagnola
post 05 Dec 2024
Antenna Transmatch tuner Links →
5 Impedance Matching
The input impedance of an antenna system can be assigned either notionally, or using a Match Meter or measuring bridge
50 watt z match tuner
A tuner that will work 10 thru 80 meters and handle up to 100 watts of RF
A single coil z match
This ATU being balanced can accomodate balanced line, open wire feeder or 300 ohm slotted
75 mt antenna Tuner
A homebrew z-match
i used a t-200-6 core. the type-6 core over the type-2 because it provides a higher q over most of the hf range
186
The input impedance of an antenna system can be assigned either notionally, or using a Match Meter or measuring bridge
A tuner that will work 10 thru 80 meters and handle up to 100 watts of RF
This ATU being balanced can accomodate balanced line, open wire feeder or 300 ohm slotted
i used a t-200-6 core. the type-6 core over the type-2 because it provides a higher q over most of the hf range
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62