Hits
A Balanced Balanced Antenna Tuner
As a rule of thumb, a balun should have about 4 times as many reactive ohms as the resistive ohms of the load. This means that for use with a 600ohm balanced load, the balun should have a secondary winding reactance of about 2400ohm
Antenna Transmatch tuner Links →
HF-6M Antenna Tuner Preselector
Frequency range: 2Mc...52Mc 180m band depending on the mismatch of the antenna used and-or maximum inductance. Experimenting with the coils can be desirable
HF Automatic tuner
The atu is composed essentially of relays commanding inductors and capacitors
I built a ZM-2 QRP Antenna tuner
The Emtech ZM-2 Antenna Tuner is a nifty little portable transmatch for QRP
Informationen zum Z-Match Koppler_Selbstbau
The Z-Match coupler is a popular balanced self-assembly coupler. The circuit diagram for the individual components looks like this
193
Frequency range: 2Mc...52Mc 180m band depending on the mismatch of the antenna used and-or maximum inductance. Experimenting with the coils can be desirable
The atu is composed essentially of relays commanding inductors and capacitors
The Emtech ZM-2 Antenna Tuner is a nifty little portable transmatch for QRP
The Z-Match coupler is a popular balanced self-assembly coupler. The circuit diagram for the individual components looks like this
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free