Hits
Antenna end fed hertz for 160m
The antenna is made for 160 meters and then with the usual formula 142 / freq you get the length of the wire of 77.10 m., but it can also be done, which only reaches 80/40 meters.
post 15 Jun 2024
Antenna 160 meter Links →
160 meter vertical antenna's base loading
The following pictures show what my 160M vertical antenna base loading and matching coil assembly looks like. Yes, I managed to shoot a line up over one of my HUGE about 135 feet tall
160 Meter Antenna for limited space
The height and width can be adjusted to fit the available area. Total length of the wire is approx. 125 feet. The single wire passes through the insulators.The weight must be secured to the wire so that it will not slide
Antenne Verticale 18m pourle 30/80/160m
10m Vertical and 30m Horizontal 12 radians of 8m, 2 of 16m, 2 of 10m, 2 of 40m
160m and 60m Inverted L project
In total 1600 ft of 14 gauge solid was used in the radial system, resulting in 16 radials each 100ft in length. Of the bunch 7 are buried in areas where vehicles and horses roam
90
The following pictures show what my 160M vertical antenna base loading and matching coil assembly looks like. Yes, I managed to shoot a line up over one of my HUGE about 135 feet tall
The height and width can be adjusted to fit the available area. Total length of the wire is approx. 125 feet. The single wire passes through the insulators.The weight must be secured to the wire so that it will not slide
10m Vertical and 30m Horizontal 12 radians of 8m, 2 of 16m, 2 of 10m, 2 of 40m
In total 1600 ft of 14 gauge solid was used in the radial system, resulting in 16 radials each 100ft in length. Of the bunch 7 are buried in areas where vehicles and horses roam
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free