Hits
Antenna 160m inverted L 18m
It will still work very good, even if the horizontal wire has to be sloped diagonally to the ground as long as you have enough horizontal space to keep it at about a 45 degree angle or more from the pole
post 04 May 2024
Antenna 160 meter Links →
Getting on 160 Meters Without a full sized Antenna
If you're like me, you don't have enough real estate for that amount of wire! However, you do not need a full sized antenna to produce a respectable, if not good signal on 160 meters
160m End Fed Antenna
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Loaded Dipole for 160 Meter
Length 26 m 85 ft Total weight: 380 g mesh constructed with enamelled wire 0.5 mm diameter
Reduced size half sloper
90
If you're like me, you don't have enough real estate for that amount of wire! However, you do not need a full sized antenna to produce a respectable, if not good signal on 160 meters
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Length 26 m 85 ft Total weight: 380 g mesh constructed with enamelled wire 0.5 mm diameter
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free