Hits
160 Meter sloper
This antenna ships 70' in length and will be trimmed back to 68' or less on installation. It works best when attached to your tower/pole at about the 45 50' level. This allows the radiator wire to be angled down toward the ground at a comfortable angle somewhere near 45 degrees
post 12 Jun 2024
Antenna 160 meter Links →
160m inverted-L - 18m Spiderpole
It will still work very good, even if the horizontal wire has to be sloped diagonally to the ground as long as you have enough horizontal space to keep it at about a 45 degree angle or more from the pole
160 Meter Tunable Counterpoise
I have been asked many times to explain how to adapt a Tunable Buried Counterpoise System to a Horizontal Loop NVIS
160 Meter Vertical
This antenna is designed for stations having a difficult time putting a decent signal on 160M from small
160m vertical ready for the snow
For the 160m vertical. It consist of 24m of WIBE tower sections and an tapered aluminum tube which is in total 14m long making the vertical 37m high
SJ2W Contest Station 160 antenna
The main antenna for the 160m band is a 39m high vertical. The antenna consist of 29m of WIBE tower sections with an insulated base and a top tube which is 10m long. The antenna is tuned to 50 ohms through a tapped inductor which also makes the antenna DC grounded. The total length of radials are about 3km, each one alteast 1/4wl long
90
It will still work very good, even if the horizontal wire has to be sloped diagonally to the ground as long as you have enough horizontal space to keep it at about a 45 degree angle or more from the pole
I have been asked many times to explain how to adapt a Tunable Buried Counterpoise System to a Horizontal Loop NVIS
This antenna is designed for stations having a difficult time putting a decent signal on 160M from small
For the 160m vertical. It consist of 24m of WIBE tower sections and an tapered aluminum tube which is in total 14m long making the vertical 37m high
The main antenna for the 160m band is a 39m high vertical. The antenna consist of 29m of WIBE tower sections with an insulated base and a top tube which is 10m long. The antenna is tuned to 50 ohms through a tapped inductor which also makes the antenna DC grounded. The total length of radials are about 3km, each one alteast 1/4wl long
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free