Hits
The Inverted L for 160m
My 160 meter antenna is an Inverted L. The length of wire required at 1.835 MHz is approximately 127 feet
post 15 Jun 2024
Antenna Vertical Links →
80m full size 1/4 wave GPA
The 18m glassfibre pole from Spiderbeam - see The antenna itself is composed of 12m of heavy flexible insulated copper wire 4mm/2 section + 7m of same but 2,5 mm/2 on the top
A Home Brew HF Vertical From Copper Pipe
I sure have logged a lot of DX from all over the lower 48, Alaska and Canada with it! It's great for portable use or set it up for permanent station operation
A Practical 5-Band Homebrew Wire Beam
The 5-band hexbeam consists of three pieces of wire for each band. Two of the wires are deployed as a center-fed radiating element and the other acts as a director
A quarter wavelength for 40 meters
Vertical antenna 1/4 wavelength 64 radials, with remote tunner
184
The 18m glassfibre pole from Spiderbeam - see The antenna itself is composed of 12m of heavy flexible insulated copper wire 4mm/2 section + 7m of same but 2,5 mm/2 on the top
I sure have logged a lot of DX from all over the lower 48, Alaska and Canada with it! It's great for portable use or set it up for permanent station operation
The 5-band hexbeam consists of three pieces of wire for each band. Two of the wires are deployed as a center-fed radiating element and the other acts as a director
Vertical antenna 1/4 wavelength 64 radials, with remote tunner
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Voice Recorder Gestito dall'integrato in questione ed offre la possibilità di registrare più messaggi per una durata massima di un minuto con buona fedeltà di riproduzione