Hits
Rhombic-Math antenna
Termination resistor needs to be near 800Ω Resistors must be carbon resistance not inductive
post 06 Jun 2024
Antenna Multibands Links →
Diamond w8010 banden 80-40-20-15 en 10 meter
The antenna described here is known under different names. It is a combination of two dipoles that are shortened with coils and thus the bands 80-40-20-15 and 10
Carolina Windom antenna
It is an off centre fed dipole, with 10 feet of vertical radiator. It needs no tuner on 40m, 20m and 10m
Multi-band antenna for the 80, 40, 20, 17, 12, 10 and 6 meter
Project for a multi-band antenna for the 80, 40, 20, 17, 12, 10 and 6 meter bands, including a 1:4 impedance transformer and a current balun handling 800 Watt with common mode attenuation up to 40 dB!
W3HH Multibands with Balun for 10/80mt
The antenna consists of a folded dipole originally fed by a two-wire 600 ohm impedance line
Clothesline antennaWhen you unroll the wire from the reel, it changes resonance in terms of it's operating frequency
156
The antenna described here is known under different names. It is a combination of two dipoles that are shortened with coils and thus the bands 80-40-20-15 and 10
It is an off centre fed dipole, with 10 feet of vertical radiator. It needs no tuner on 40m, 20m and 10m
Project for a multi-band antenna for the 80, 40, 20, 17, 12, 10 and 6 meter bands, including a 1:4 impedance transformer and a current balun handling 800 Watt with common mode attenuation up to 40 dB!
The antenna consists of a folded dipole originally fed by a two-wire 600 ohm impedance line
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free