Hits
Wilkinson divider for 145 MHz
On 2320MHz I needed a receive power splitter for my IF 144 MHz. It had to cover the 100-150 MHz range
post 30 Sep 2024
Antenna Duplex duplexer Links →
2m/70cm Diplexer
The easiest way to set the filters up without a network analyser, is to connect a good 50 Ohm load to the antenna port and adjust the spacing between the turns of the coils to achieve a good VSWR
2m - 70cm diplexer
With this diplexer, you can connect a 2m (144-146 MHz) and 70cm (430-440 MHz) transmitter to a single dualband antenna, or a dualband transmitter to two seperate antennas
2m-70cm Duplexers-Diplexer
Onze 2 m band eindigt bij 146 MHz en de 70 cm band begint bij 430 MHz. Het midden ligt op 146 + 430 - 2 = 288 MHz
33 MHz diplexer
This is optional, but the diplexer should be mounted as close to the mixer's IF output as possible
1.3-400 / 150-460 MHz Duplexer Devresi Eklendi
50
The easiest way to set the filters up without a network analyser, is to connect a good 50 Ohm load to the antenna port and adjust the spacing between the turns of the coils to achieve a good VSWR
With this diplexer, you can connect a 2m (144-146 MHz) and 70cm (430-440 MHz) transmitter to a single dualband antenna, or a dualband transmitter to two seperate antennas
Onze 2 m band eindigt bij 146 MHz en de 70 cm band begint bij 430 MHz. Het midden ligt op 146 + 430 - 2 = 288 MHz
This is optional, but the diplexer should be mounted as close to the mixer's IF output as possible
Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal