Hits 

Build a Multi-Band Mono Delta Loop


Make up a 14 MHz delta loop using two separate lengths of 10 meter plus 10 centimeters each of No. 12 or No. 14 stranded copper wire and connect them in series with an insulator as shown at the bottom of Fig 1. The 10 cm extra wire is passed through the end hole of the insulator then looped back to the wire element to form a splice for later soldering
post 02 Feb 2024
Build a Multi-Band Mono Delta Loop

Antenna Delta Loop Links

54



Delta Loop antenna 3.5 - 30 MHz
84 m Total Wire Length (L1 + L2 + L3) - 28 m Triangle Length (L1 = L2 = L3) - 10.56 m 75ohm coaxial length

Delta Loop Lazy loop from 160 to 10 meters
The loop is 3.650 Mhz. For matching the loop on the other bands I use a Toroid Balun with

Double Half Delta DHD
In teoria dovrebbe restituire un segnale basso ma con un buon rapporto S/N, pressappoco come una Beverage. L' antenna e' costituita da due triangoli di filo sospesi a un metro e mezzo da terra


Antenna splitter per VHF-UHF per quattro ricevitori

Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter

Kits and Components

Amateur radio kits by Kanga US

50MHz to 28MHz RX Converter

50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal