Hits
Matching 50 ohm to 75 ohm
Most signal generators have an output impedance of 50Ω. To align an FM tuner or measure its performance, it's best to match this to the tuner's 75Ω input impedance
post 19 Oct 2024
Antenna Transmatch tuner Links →
A Mini Tuner for HF
From 80 - 10 metres, unbalanced. John has modified it by incorporating a balun
A simple antenna tuner for 4m
I have made 2 others since ,but used a low current Led instead of the original pea lamp
A Useful ATU Circuit
It uses a parallel circuit for 30 - 80 and a series tuned arrangement for the bands up to 10 metres
Automatic Antenna Tuner
Easy and cheap automatic antenna tuner which can works as locale or as remote. tuner has eeprom memory for store settings for faster tunning and four interfaces
Balanced Line Tuner BLT
The BLT is a simple Z-Match tuner that works from 10-40 meters
193
From 80 - 10 metres, unbalanced. John has modified it by incorporating a balun
I have made 2 others since ,but used a low current Led instead of the original pea lamp
It uses a parallel circuit for 30 - 80 and a series tuned arrangement for the bands up to 10 metres
Easy and cheap automatic antenna tuner which can works as locale or as remote. tuner has eeprom memory for store settings for faster tunning and four interfaces
The BLT is a simple Z-Match tuner that works from 10-40 meters
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free