Hits
Double-L Antenna For 80-160m
The antenna is a center-fed half wave vertical with about 70 feet of vertical length with the remainder of the top and bottom of the antenna bent horizontal and parallel to each other. The antenna looks like a squared-off letter C fed in the middle of the vertical part
post 18 Jun 2024
Antenna 160 meter Links →
160m End Fed Antenna
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Loaded Dipole for 160 Meter
Total Length 26 m 85 ft. Total Weight: 380 g Mesh constructed with enamelled wire 0.5 mm diameter Mesh-size 4 m x 2 m 13 x 6.5 ft
Morgain 160mt
The total length of each of the radiator halves is about 60 m. They are folded three times, as shown schematically
Inverted Ls and Vs Slopers Linear Loaded
90
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Total Length 26 m 85 ft. Total Weight: 380 g Mesh constructed with enamelled wire 0.5 mm diameter Mesh-size 4 m x 2 m 13 x 6.5 ft
The total length of each of the radiator halves is about 60 m. They are folded three times, as shown schematically
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free