Hits
160 Meter Low Noise antenna
Over the last 28 years I have tried many different 160 meter antennas. My most recent antenna for top band was an odd shaped 160 meter full wave length loop. In October 2012 I changed my 160 meter transmitting antenna to an Inverted L with FCP folded counter poise. The FCP was developed by K2AV
post 28 Jan 2024
Antenna 160 meter Links →
EH per i 160 metri
Antenna EH per 160 metri,diametro tubo 400mm materiale del tubo PVC
Getting on 160 Meters
It's true, a full sized, half wave dipole for 160 meters is rather big around 250 feet long
Inverted-L for 80m & 160m
On 160m good performances, I could only test this in SSB, despite the fact that topband is a CW band! Noise level S7 about BW 2,2 kHz. Worked several stations in USA and S. America Brazil, Nicaragua with 800w PEP. Bandwidth for SWR 1.5:1 is 20 kHz, for 2:1 30 kHz, for 3:1 is 50 kHz
Lifted antennas kite for amateur Radio 160 Meters
The foul weather vertical is working against about a kilometre of wire under the ground. Radials, about 60 of them, vary in length from 45 to 120 feet
90
Antenna EH per 160 metri,diametro tubo 400mm materiale del tubo PVC
It's true, a full sized, half wave dipole for 160 meters is rather big around 250 feet long
On 160m good performances, I could only test this in SSB, despite the fact that topband is a CW band! Noise level S7 about BW 2,2 kHz. Worked several stations in USA and S. America Brazil, Nicaragua with 800w PEP. Bandwidth for SWR 1.5:1 is 20 kHz, for 2:1 30 kHz, for 3:1 is 50 kHz
The foul weather vertical is working against about a kilometre of wire under the ground. Radials, about 60 of them, vary in length from 45 to 120 feet
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free