Hits
160 meter Half Sloper with radials
Half Sloper with a 160 meter coil simple concept. You take it to the top of the tower but under your 3 element beam which creates capacitance on the grounded side. Then obviously you load the center of the 50 ohm coax to the wire and slope it back down
post 05 Dec 2024
Antenna 160 meter Links →
160m End Fed Antenna
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Loaded Dipole for 160 Meter
Total Length 26 m 85 ft. Total Weight: 380 g Mesh constructed with enamelled wire 0.5 mm diameter Mesh-size 4 m x 2 m 13 x 6.5 ft
Morgain 160mt
The total length of each of the radiator halves is about 60 m. They are folded three times, as shown schematically
Inverted Ls and Vs Slopers Linear Loaded
89
The antenna is sported by a 22ft 6.7m central support and a 12ft 3.66 end support
Total Length 26 m 85 ft. Total Weight: 380 g Mesh constructed with enamelled wire 0.5 mm diameter Mesh-size 4 m x 2 m 13 x 6.5 ft
The total length of each of the radiator halves is about 60 m. They are folded three times, as shown schematically
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62
Radioassistance Radioassistance E Kenwood Dealer, vendita ricetrasmittenti, antenne, parti di ricambio, elettronica
Conrad Electronic Electronic components online shop in German and Italian