Hits
IC-7000 Mic modifica
La modulazione un poco troppo telefonica, non e' un difetto, ma e' una caratteristica di tutte le nuove generazioni di radio, specie le ICOM
post 22 Jun 2024
Microphone Setting Links →
Microphne connections
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
MH-31 installation and other portable microphones
I have described the function of an HF clipper on my website and here I go into some special features of the HF clipper for the FT-817
Microphone boom headset for the FT-897
Whilst experimenting with various microphones for use with the FT-897, I realised that a boom headset would be a useful accessory
Microfono ad alto guadagno
Guadagno = 40 V/V 32dB,Frequenza centrale = 3500 Hz,Banda passante = 1500 Hz,Numero di poli = 2
DB37-FT-2000 Cable
can be used with the following microHAM interfaces
44
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
I have described the function of an HF clipper on my website and here I go into some special features of the HF clipper for the FT-817
Whilst experimenting with various microphones for use with the FT-897, I realised that a boom headset would be a useful accessory
Guadagno = 40 V/V 32dB,Frequenza centrale = 3500 Hz,Banda passante = 1500 Hz,Numero di poli = 2
can be used with the following microHAM interfaces
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free