Hits 

Cushcraft R5 1/2 lambda Vertical


Cushcraft R5 1/2 lambda Vertical

The 17ft half wave vertical is covering the 10, 12, 15, 17, and 20m amateur bands. The antenna does not require traditional ground radials, so no need for unsightly radials and is so light a normal scaffold pole would be ideal to mount the antenna

post 10 Oct 2024


Antenna Vertical Links

184



3_elementi_array
Essenzialmente, questa e' una singola antenna verticale a 1/4 d'onda con radiali a terra, complimentata da una coppia di verticali parassiti

7 band semi vertical trap antenna
The vertical section of their antenna is listed as 32'-6" high with a 7.00 MHz trap mounted at the top followed by 27'-6" of horizontal wire for 80m

1/4 Wave HF Multiband Vertical for 40 - 10 Meters
It consists of 3 sections of thick wall PVC connected together and may be self supporting

80/40m Vertical
The HF2, is about 30ft long, and has an L/C band switching arrangement near the base. This L/C circuit consists of two coils in series


Antenna splitter per VHF-UHF per quattro ricevitori

Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter

Kits and Components

Amateur radio kits by Kanga US

50MHz to 28MHz RX Converter

50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal