Hits
Coaxial fed multiband windom antenna
This simple multiband antenna works on all HF bands from 3.5 to 30 MHz, including WARC bands other than 10.1 MHz
post 24 Feb 2024
Antenna Transmatch tuner Links →
Build hf antenna tuner
This page details several T-match tuners. By comparing them, you should be able to construct a tuner to your own particular requirements
Realization of a coupling box by Patrice
The torus has 6 wires: 2 side CV, 2 side self and 2 to the outputs of the box, for the RX - TX.- For the six outputs of the torus, put "souplisso" recovered on the transformer of a micro insulation 2000 volts
Box agreement antenna with coil with caster and 4 CV isolated
From the left to the right we see the balun on the ferrite bar, the 4-cage CV and the roller coaster.
Box Antenna tuner monobande 28/30 MHz
Like the 10 MHz mono-band box, this box operates in autotransfo. The permissible power is greater than 200 watts
156
This page details several T-match tuners. By comparing them, you should be able to construct a tuner to your own particular requirements
The torus has 6 wires: 2 side CV, 2 side self and 2 to the outputs of the box, for the RX - TX.- For the six outputs of the torus, put "souplisso" recovered on the transformer of a micro insulation 2000 volts
From the left to the right we see the balun on the ferrite bar, the 4-cage CV and the roller coaster.
Like the 10 MHz mono-band box, this box operates in autotransfo. The permissible power is greater than 200 watts
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free