Hits
40 Meter lazy H array
The LAZY "H" antenna is a general type of antenna that is in the curtain array family. you can achieve a HIGH GAIN bi-directional antenna
post 04 Dec 2024
Antenna Multibands Links →
Frecuencias de 7.1 Mhz y 3.650 Mhz
This dipole antenna is very good for those with small spaces.The antenna is designed with two load coils that cut the frequency in a given band
L'antenne Hertz-Conrad-Windom
The Hertz antenna, known in the USA under the name of Windom, is a multiband wire antenna made up of a horizontal radiating element of lambda / 2 length and fed at one third of its length by a single feeder wire.
La W3dzz
After a gentle cleaning of the group, I notice that the condenser is located in the center of the inductor
Log periodic 4 elements
My main limitation being this small mast, I had to make a tough compromise and my 12 elements turned more realistically into a 4 elements design. The 4 elements were calculated to be part of a 8 element design, in case I could build it in future times
Low-Cost Broadband Travelling Wave Dipole
A dipole can be modified by inserting resistive loading networks so as to produce standing waves between the feedpoint and the networks. The authors have, by adjustment of the networks and the dipole sections, developed a travelling wave dipole whose VSWR is less than 2:1 from 3 to 15 MHz and does not exceed 2.6 to 1 from 2.3 to at least 30 MHz
156
This dipole antenna is very good for those with small spaces.The antenna is designed with two load coils that cut the frequency in a given band
The Hertz antenna, known in the USA under the name of Windom, is a multiband wire antenna made up of a horizontal radiating element of lambda / 2 length and fed at one third of its length by a single feeder wire.
After a gentle cleaning of the group, I notice that the condenser is located in the center of the inductor
My main limitation being this small mast, I had to make a tough compromise and my 12 elements turned more realistically into a 4 elements design. The 4 elements were calculated to be part of a 8 element design, in case I could build it in future times
A dipole can be modified by inserting resistive loading networks so as to produce standing waves between the feedpoint and the networks. The authors have, by adjustment of the networks and the dipole sections, developed a travelling wave dipole whose VSWR is less than 2:1 from 3 to 15 MHz and does not exceed 2.6 to 1 from 2.3 to at least 30 MHz
Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal