Hits
Antenna gp 3,5 MHz a carico lineare
- Questa antenna verticale per gli 80 metri a carico lineare, di 1/2 onda e nata dal bisogno di avere un'antenna con un buon angolo di irradiazione
post 13 Jan 2025
Antenna 80 meter Links →
Verticale per 80m
La struttura portante è realizzata con tubi in fibra di vetro ma la radiazione proviene da un filo fissato al tubo
Vertical resonant around 3.5 MHz
The combination of wire is resonant around 3.5 MHz. With a 30 uH inductor, the resonance becomes about 1.83 MHz. A series 68-ohm resistor and 16 25 foot radials brings the feed point impedance
Verticale ad un quarto d'onda accorciata
la costruzione di una verticale monobanda, facile da realizzare, per la gamma dei 75/80 m
Shunt-Feeding a Short Tower on 80 and 160m
The shunt design has been through several iterations at my QTH. First was a single wire that was matched for 80m using an omega match
75
La struttura portante è realizzata con tubi in fibra di vetro ma la radiazione proviene da un filo fissato al tubo
The combination of wire is resonant around 3.5 MHz. With a 30 uH inductor, the resonance becomes about 1.83 MHz. A series 68-ohm resistor and 16 25 foot radials brings the feed point impedance
la costruzione di una verticale monobanda, facile da realizzare, per la gamma dei 75/80 m
The shunt design has been through several iterations at my QTH. First was a single wire that was matched for 80m using an omega match
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters