ccount_display('74')
A 20 Meter Half Square
The half square is made of a two strand computer ribbon cable 100 feet long, 47 feet of which is used for the balanced feed line
post 05 Dec 2024
Antenna 20mt 14 Mhz Links →
Linear Loaded yagi
The center loading coil required for our model antenna showed about 248 ohms for each element
Mini horizontal V 2 element 20MT
An electrical 1/2 wave length of RG58 as a 1:1 transformer. Using the antenna analyzer from the ground the following measurements were noted, impedance 25 ohms SWR 2:1, the antenna was resonated to 14250 Khz
The Shorty Dipole for 14mHz
The dipole is half the size of the usual full sized versions and is therefore about the size of a ten metre dipole
Shorten 20m band rotary dipole
28
The center loading coil required for our model antenna showed about 248 ohms for each element
An electrical 1/2 wave length of RG58 as a 1:1 transformer. Using the antenna analyzer from the ground the following measurements were noted, impedance 25 ohms SWR 2:1, the antenna was resonated to 14250 Khz
The dipole is half the size of the usual full sized versions and is therefore about the size of a ten metre dipole
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62