Antenna collineare cavo coassiale RG.213
Realizzata tutta in cavo coassiale RG.213 o altro cavo, tranne lo stilo
post 19 Dec 2021
Antenna for UHF VHF Links →
Triband Yagi for 6 m, 4 m and 2 m
Developed with the software EZNEC +5 and has only one feeding point of 50 Ω and a boomlength of 1,25 m
2M 144MHz yagis
Follow the instructions carefully to avoid making mistakes
VHF antenna construction
In making a folded dipole element I used a tube bender, apparently the bending jobs must be done once without failure
Vhf magnetic loop
A magnetic loop has very small bandwidth butunsensitive to man made noise
VHF/UHF Wideband Portable Dipole for the FT-817
A dipole has about 3dB gain over a quartre wave antenna, is why my preference went to a simple dipole
154
Developed with the software EZNEC +5 and has only one feeding point of 50 Ω and a boomlength of 1,25 m
Follow the instructions carefully to avoid making mistakes
In making a folded dipole element I used a tube bender, apparently the bending jobs must be done once without failure
A magnetic loop has very small bandwidth butunsensitive to man made noise
A dipole has about 3dB gain over a quartre wave antenna, is why my preference went to a simple dipole
Antennas_manufacturers
About Rtty mode
Audio Recording
Amplifiers
Antennas Satellite
Amateur Television ATV
Aprs software
Beacon
Band Plan Ham Radio
Capitals Europe
DX cluster software
Italy provices
Italia-call-ham radio Italy provices Ham Radio Clubs Italy
EME Ham Radio Satellite
Grid Software
Ham shirts
Ham radio Magazine
Log Converter Software
Logs Search Services
Meteor scatter
Microwave
Mac Ham Radio Software
Practice with the soldering
Propagation Solar Cycle
Power Supply
PMR 466Mhz
Packet Radio TNC
PSK31 software
Prefix World
Propagation prediction
Qrp low power
QSL Printing
QRSS Amateur VLF operating
Radio old Museum
Radio portal
Surplus radio
Sstv Photo
SWL Shortwave DX Radio
Telegraph Morse code
VHF Activit
Web SDR