Hits
70cm mixed mode helix
The turns of copper pipe are held in place by a single turn of thin copper wire wrapped around the pipe and soldered close to the plastic pipe
post 10 Sep 2024
Antenna for UHF VHF Links →
70cm-Longyagis in 28Ohm
The elements have 10 mm, 8 mm or 6 mm diameter, because this is very uncritical and you get the expected datas! For the tuning let the radiator 2mm longer and cut for best SWR at 432 MHz
900 MHZ Quagi beam
The quad elements were made from #11 AWG copper rewind wire and the directors were made from .063 diameter brass welding rod
Yagi for 432 MHz
Frequency of 432 mhz,9 director elements, for a total of 11 elements
A 2-Meter Phased-Array Antenna
a small vertical phased array that can easily be built and cost is minimal is taken from an article in QST
Antena Doble Bazooka para 2 metros
Antenna built with coaxial cable, measures from the formula 158.9 / F, total length, 99.6 / F length of the coaxial cable
149
The elements have 10 mm, 8 mm or 6 mm diameter, because this is very uncritical and you get the expected datas! For the tuning let the radiator 2mm longer and cut for best SWR at 432 MHz
The quad elements were made from #11 AWG copper rewind wire and the directors were made from .063 diameter brass welding rod
Frequency of 432 mhz,9 director elements, for a total of 11 elements
a small vertical phased array that can easily be built and cost is minimal is taken from an article in QST
Antenna built with coaxial cable, measures from the formula 158.9 / F, total length, 99.6 / F length of the coaxial cable
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free