Hits
Cheap Yagi Antennas for VHF/UHF
The simplified feed uses the structure of the antenna itself for impedance matching. So the design started with the feed and the elements were built around it
post 01 Jul 2024
Antenna for UHF VHF Links →
Antenna HB9CV for 435 Mhz
The HB9CV+3 is a fullfeeded directional antenna with 2 active plus 3 passive elements. One might call this array "HB9CV-Yagi". This adds about 3dBd over a pure HB9CV and eliminates the squint of the classical 2-element HB9CV
Antenna system with four polarizations linear and circular
At VHF and UHF, hams utilize both linear and circular polarization linear polarization horizontal, vertical is used for normal direct ommunications
Antenna yagi due elementi VHF
Radiatore piu' direttore perchè almeno in teoria mi da circa 5,5 db di guadagno e un rapporto fronteretro pari o superiori ai 15 db
155
The HB9CV+3 is a fullfeeded directional antenna with 2 active plus 3 passive elements. One might call this array "HB9CV-Yagi". This adds about 3dBd over a pure HB9CV and eliminates the squint of the classical 2-element HB9CV
At VHF and UHF, hams utilize both linear and circular polarization linear polarization horizontal, vertical is used for normal direct ommunications
Radiatore piu' direttore perchè almeno in teoria mi da circa 5,5 db di guadagno e un rapporto fronteretro pari o superiori ai 15 db
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free