Hits
144 MHz Long Yagi
43 element long yagi for the low end of the 2m band, 98.5' (32.349 m) long portable antenna wuth a high gain 19 dbd
post 03 Feb 2024
Antenna for UHF VHF Links →
Stacking Transformation
The ideal impedance transformation ratio are actualy ZL = 50 Ohm and ZI = 100 Ohm, but to get this ideal impedance transformation means that for TR, we must use a coaxial cabel with a Characteristic impedance Zo = 70.71 Ohm
Super facil antena vhf 1/4 onda
Antenna Ground plane (GP) has the property of receiving and transmitting in an omnidirectional way, that is to say everywhere equally
Super J-Pole Collinear
The antenna J is very simple in construction and has good results
T-match for vhf -uhf Antennas
The T-Match with its balanced feed point is one method of feeding a Balanced Dipole
Antenna Yagi 11 Elements
After using the charts according to DL6WU, the following values have been encoded for the calculation
155
The ideal impedance transformation ratio are actualy ZL = 50 Ohm and ZI = 100 Ohm, but to get this ideal impedance transformation means that for TR, we must use a coaxial cabel with a Characteristic impedance Zo = 70.71 Ohm
Antenna Ground plane (GP) has the property of receiving and transmitting in an omnidirectional way, that is to say everywhere equally
The antenna J is very simple in construction and has good results
The T-Match with its balanced feed point is one method of feeding a Balanced Dipole
After using the charts according to DL6WU, the following values have been encoded for the calculation