Hits
Balun trasfomazione multipla
Con un rapporto 4:1 portiamo ad 1/4 l'impedenza che presenta l'antenna, con un rapporto 9:1 ad 1/9 e con un rapporto 16:1 ad 1/16. Alcuni esempi di elevati valori d'impedenze che potrebbe presentare un'antenna, adattate tramite balun
202
Balanced and unbalanced systems can produce common mode currents that cause equalizing currents at the interface of both systems. And exactly at this interface baluns are switched
known as a Magnetic Longwire Balun, it is an impedance transformer whose purpose is to feed a high impedance long wire from a 50ohm unbalanced coaxial input. With a 9:1 turns ratio, this gives 450ohm output impedance for the long wire
My Baluns are working well on both my 40M resonant dipole and my G5RV antennas
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods, some electrical tape, cable ties, a length of PVC water-pipe and some connectors
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free