Hits
Balanced Terminated Folded Dipole
Designed my btfd to operate on a minimum frequency of 1.8 mhz with an intended use spaning from 1.9 to 11.0 mhz
post 04 Feb 2024
Antenna 40 Meter Links →
Shortened with 40 turns trap 7 mhz Dipole
To construct each side of the antenna proceed as follows. Cut a 10.25 metre length of 24/0.076 insulated wire, and a 160 mm length of 40 mm o.d plastic tubing
Shortening your dipole
Loaded dipole antenna that is intended to fit in available space
Sloper sloping dipoles 40mt-80mt
Having only a single vertical support or limited horizontal space might be a problem.Such a problem can be solved by mounting a dipole at a slope
Super gain antenna project for 40 meters
It is based on the theory of super gain NVIS arrays, which reject QRM from low angles and produces a very high angle of radiation
Short Antenna per le HF
L'antenna e fatta da 3 parti, la parte radiante con la sua capacita
73
To construct each side of the antenna proceed as follows. Cut a 10.25 metre length of 24/0.076 insulated wire, and a 160 mm length of 40 mm o.d plastic tubing
Loaded dipole antenna that is intended to fit in available space
Having only a single vertical support or limited horizontal space might be a problem.Such a problem can be solved by mounting a dipole at a slope
It is based on the theory of super gain NVIS arrays, which reject QRM from low angles and produces a very high angle of radiation
L'antenna e fatta da 3 parti, la parte radiante con la sua capacita
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Voice Recorder Gestito dall'integrato in questione ed offre la possibilità di registrare più messaggi per una durata massima di un minuto con buona fedeltà di riproduzione