Hits
Electronic Components and Systems
RF coax connectors are designed to transmit analog signals while minimizing radio frequency RF signal losses
post 01 Feb 2024
Antenna Feed Lines Links →
10 80m doublet antenna
is at about 57 feet 17.4m and the feeder is about 60ft 18.3m long almost vertical but comes into the house about 3 ft above ground level
How do I properly feed coax through an outside wall?
a new cable outlet to an outside wall and wanted to find out what kind of drill bit is needed to drill through and feed the coax cable
Low loss Japanese coaxial cable
about having as good an antenna system as you can manage to get the best out of six metres
Of end-feds and feed-lines
The end-fed half-wave antenna can function alone, but feed lines are the norm regardless
Openwire ladder line
Normally there is no need to retune the matchbox when using Ladder-Line
48
is at about 57 feet 17.4m and the feeder is about 60ft 18.3m long almost vertical but comes into the house about 3 ft above ground level
a new cable outlet to an outside wall and wanted to find out what kind of drill bit is needed to drill through and feed the coax cable
about having as good an antenna system as you can manage to get the best out of six metres
The end-fed half-wave antenna can function alone, but feed lines are the norm regardless
Normally there is no need to retune the matchbox when using Ladder-Line
Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal