Hits
CAT System sulla presa MIC per Yaesu FT-897-FT-857
Quando su uno degli apparati Yaesu FT-897 o FT-857 si utilizza un accordatore automatico tipo FC-30, questi occupa anche la porta condivisa CAT/LINEAR
post 19 Apr 2024
Microphone Setting Links →
Kenwood MC-50 modification
There have been a few instances of improper VOX operation when the MC-50 microphone is used
Kenwood Mc-60 to Icom IC746
MC‐60APinConnections,BeforeandAfterModifications,forUsewithICOMRadios
Kenwood Pin Connectors
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
Kenwood TR-7950 Microphone Pinout
I looked through the internet for a microphone pinout for this Kenwood I was given. The wires had been yanked from the mic connect
Low Noise Microphone Preamplifier
This is a design for a low noise microphone preamplifier, which is ideally suited to low impedance 600 Ohm nominal microphones
44
There have been a few instances of improper VOX operation when the MC-50 microphone is used
MC‐60APinConnections,BeforeandAfterModifications,forUsewithICOMRadios
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
I looked through the internet for a microphone pinout for this Kenwood I was given. The wires had been yanked from the mic connect
This is a design for a low noise microphone preamplifier, which is ideally suited to low impedance 600 Ohm nominal microphones
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62
RF Inductance Calculator Mean diameter of the air core coil, measured from conductor centre to conductor centre include the wire insulation thickness, if any
Voice Recorder Gestito dall'integrato in questione ed offre la possibilità di registrare più messaggi per una durata massima di un minuto con buona fedeltà di riproduzione