Double bazooka coaxial dipole broad-band

Hits

Double bazooka coaxial dipole broad-band

This antenna can be cut for any operating frequency, from 160-meters down. The RG-58U is capable of handling a full kilowatt. This design is broad-banded will provided low SWR

post 24 Feb 2024

Double bazooka coaxial dipole broad-band

Antenna Bazzoka Links →

35

Bazooka Antenne
The bazooka behaves neutral to various environmental influences and is very broadband

Bazooka Dipol
The Bazooka is a monoband dipole made using RG 58 coaxial cable, with 500 watts without further ado

Coaxial Dipole
coaxial dipole formed from two 1/4 wave shorted end stubs

Coaxial dipole antenna 128 MHz
The antenna is known as a double bazooka design and is very popular with radio amateurs who make it for 144-146mhz FM operations

Ferrite-shop

Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice

Kits and Components

Amateur radio kits by Kanga US

Pcs Electronics

Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters

Simple Rtty codec system based on arduino e android A unit for receiving Rtty transmissions was created, the differences are essentially limited to the Arduino software used

All band dipole Mk2 The All Band HF Doublet is often referred to as a random length dipole as it is generally as long as the available space within reason, but here are a couple of limitations to the ultimate dipole length

160M 1/4 Wave Vertical 160m vertical antenna project. It is 100' of Rohn 25G and a 20' aluminum stinger. The base is made out of four 6' power line insulators sandwiched between two Rohn base plates. 7/8' stainless bolts hold the assembly together. 32 radials 50' long and 30 radials 100'

DHD Double Half Delta

DHD Double Half Delta This is a dhd double half delta in theory it should return a low signal but with a good s - n ratio roughly like a beverage

Visual CW Tuning Indicator

Visual CW Tuning Indicator Many transceivers set the CW transmit off-set equal to the set's sidetone frequency. But it was left to the operator how to match incoming signals to the sidetone for one-frequency QSOs an awkward and time-consuming procedure

Convert ADIF to Cabrillo Format

Convert ADIF to Cabrillo Format Have an ADIF file from amateur radio contesting, but the contest you want to enter wants a Cabrillo-formatted file? This is the tool that you need

trap-dipole-7-10-14-18-50-mhz

Trap Dipole 7, 10, 14, 18, 50 MHz Trap dipole 7-10-14-18-50mhz with balun coax cable

Diy Arduino CW keyer

Diy Arduino CW keyer I added code to read push-buttons on digital pins to trigger hard-coded messages like CQ and CQ SOTA