Hits
Antenna Yagi home brew for 2m
The adaptation, in principle, is the well-known Tonna feed, but cleverly modified. This one here symmetrizes and transforms, therefore also the two parallel cables to 75 ohms
post 06 Mar 2024
Antenna for UHF VHF Links →
Building a 440mhz quagi antenna
The Quagi requires neither fine tuning nor careful handling
Las antenas Moxon
Regarding the polarization of this antenna, what is said for the Turnstile is valid, since the circular polarization is obtained in the same way,the impedance adaptation is also similar
Lowcost yagi antenna for PMR446, easy to build
PMR446 stands for Personal Mobile Radio and is a license free radio in the 446 MHz UHF band. That is about 6 Mhz above the 70cm amateur radio band
Small Wideband Yagi
This small Yagi has 5.2 – 7.2 dBd forward gain with all backlobes more than 20 dB down across the FM broadcast band
Jpole for 440 mhz
154
The Quagi requires neither fine tuning nor careful handling
Regarding the polarization of this antenna, what is said for the Turnstile is valid, since the circular polarization is obtained in the same way,the impedance adaptation is also similar
PMR446 stands for Personal Mobile Radio and is a license free radio in the 446 MHz UHF band. That is about 6 Mhz above the 70cm amateur radio band
This small Yagi has 5.2 – 7.2 dBd forward gain with all backlobes more than 20 dB down across the FM broadcast band
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
30 Volt Computer Power Supply Stack A bonus was that i discovered that these did not need a standby load connected to the supply to keep them running just apply mains power and close the Start lead to ground