Hits
Balun Theory
A balun is used to "alance"unbalanced systems
post 20 Oct 2024
Toroid & balun Links →
6:1 Voltage Balun
Requiring a balun to feed a balanced antenna from an un-balanced load with a impedance step up from 50ohms to 300ohms, a 1:6
9:1 transformer
A balanced antenna from an un-balanced load with a impedance step up from 50ohms to 300ohms, a 1:6 Voltage balun design using two L15 ferrite toroid cores was selected
A 9:1 Balun For Your End Fed Antenna
unun transformer unbalanced to unbalanced. The raw End-Fed antenna will go through impedance swings as high as 5K Ohms,or more, at even multiples of its 1/4 wavelength design frequency
202
Requiring a balun to feed a balanced antenna from an un-balanced load with a impedance step up from 50ohms to 300ohms, a 1:6
A balanced antenna from an un-balanced load with a impedance step up from 50ohms to 300ohms, a 1:6 Voltage balun design using two L15 ferrite toroid cores was selected
unun transformer unbalanced to unbalanced. The raw End-Fed antenna will go through impedance swings as high as 5K Ohms,or more, at even multiples of its 1/4 wavelength design frequency
Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal