Hits
Balun 1:64 for end fed antenna
The coil now has a 16/2 ratio 1: 64 For max. performance the 2 turns to ground must be twisted
post 23 Mar 2024
Toroid & balun Links →
Balun for yagi 144mhz
Balun yagi if coax type rg59/u is long 34,5 cm
Baluns on Log Periodic Antennas
This is the electrically ideal method of bringing the feed line back to the mast from the log feed. This method keeps the coaxial line away from the balanced transmission line formed by the boom. This works with ANY log periodic and good balun, including 200-300 ohm balanced systems
Coaxial balun
I used RG58 coaxial cable since I use less than 300 W power. Better is the use of the RG142 Coaxial cable with Teflon dielectric, which handle a power of 2 KW at 144 MHz with a lower loss also
End-Fed 160-10m Long Wire
diy 9:1 a un-un unbalanced to unbalanced transformer the heart of the un-un uses a type 43 ft240-43 core and consists of a trifilar 3 wire winding arrangement around the core
End fed long wire
I will try to share my experience with the end fed long wire antenna
202
Balun yagi if coax type rg59/u is long 34,5 cm
This is the electrically ideal method of bringing the feed line back to the mast from the log feed. This method keeps the coaxial line away from the balanced transmission line formed by the boom. This works with ANY log periodic and good balun, including 200-300 ohm balanced systems
I used RG58 coaxial cable since I use less than 300 W power. Better is the use of the RG142 Coaxial cable with Teflon dielectric, which handle a power of 2 KW at 144 MHz with a lower loss also
diy 9:1 a un-un unbalanced to unbalanced transformer the heart of the un-un uses a type 43 ft240-43 core and consists of a trifilar 3 wire winding arrangement around the core
I will try to share my experience with the end fed long wire antenna
23cm Yagi Antenna building Finished antenna at 1275 MHz SWR under 1:1.5 at resonant frequency
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
Interface-for-digital-broadcasts-with-integrated-audio 4-port HUB, with a TUSB2046. With port 1 of the HUB we drive the FT232RL; with port 2 the PCM2904, furthermore, we decided to leave ports 3 and 4 free